|
|
Powdered Metal Stainless Steel Brake Cam
(Click on thumbnail to enlarge) |
We manufacture this brake cam at our plant in Pomona, CA specifically for cable safety brakes used in a pallet lift system. As a lower cost alternative to conventional machining and laser cutting, powdered metal compaction and sintering are now used to produce these brake cams. The pressing tools were completely designed in-house at Precision Powdered Metal Parts, Inc. Developed on our own 100-ton presses, the parts are produced to a close tolerance of +/- 0.002" at densities of 6.6 gms/cc. Vibratory deburring are used to break sharp edges and produce a uniform material finish. The brake cam measured 1.750" in length and 1.640" in width. We typically produce 5,000 of these brake cams per order and deliver them to the customer's location in Texas.
|
Specifications:
| Product Name: |
Brake Cam |
| Capabilities Applied/Processes: |
Powdered Metal Compaction
Sinter
Deburr |
| Tightest Tolerance: |
+/- 0.002" |
| Material Thickness: |
0.500" (as pressed) |
| Product Length: |
1.750" |
| Product Width: |
1.640" |
| Product Height: |
0.500" |
| Product Weight: |
0.20 lbs. |
| Density: |
6.6 gms./cc |
| Press Size: |
100 Tons |
| Surface Roughness: |
32 RMS |
| Base Material: |
304 Powdered Metal Stainless Steel |
| Special Feature: |
Tooth Tips |
| Secondary Operations Applied: |
Vibratory Deburr |
| Industry for Use: |
Pallet Lift System |
| Volume: |
5,000 |
| Delivery Location: |
Texas |
| Standards Met: |
MPIF STD. 35 |
| Product Name: |
Brake Cam |
| Project Scope: |
Replace laser cut from plate, eliminate machining |
| Design Work: |
In-House |
| Tooling Cost: |
$6,500 |
| Product Description: |
Cable Safety Brake |
Back to top | |
